Tu carrito está vacío
I decided to try out a higher end belt since I was tired of cheap belts burning up so quick and was very satisfied with how these have and continue to perform!
Bandas abrasivas de circonio de grado industrial de 4x36"
Nuestras bandas de lijado de circonio de grado industrial son una excelente opción para aplicaciones de rectificado de alta resistencia. Los granos abrasivos autoafilantes de circonio prolongan la vida útil de la correa hasta 2,5 veces más que el óxido de aluminio. La circona se fractura durante el uso, revelando continuamente granos abrasivos afilados. Su durabilidad lo convierte en una excelente opción para fabricantes de cuchillos, herreros, soldadores o cualquier persona que trabaje con metales. Si bien no igualará la longevidad de los abrasivos cerámicos, el circonio es una alternativa rentable. Aplicaciones húmedas o secas. Construido a mano en los EE.UU.
Granos disponibles: 24, 36, 40, 60, 80, 100, 120
Cantidad de paquete de grano único: 3
El surtido de grano grueso incluye: 1 de cada uno de 40, 80, 120
Peso: Peso Y
Material de respaldo: Poliéster
Resistente al agua: Sí
Aplicaciones: Desbaste, perfilado, biselado, afilado, rectificado de soldaduras, perfilado, corte y combinación de metales ferrosos y no ferrosos (acero, acero inoxidable, aleaciones, acero endurecido, aluminio, cobre, titanio). , níquel, etc.). También apropiado para maderas muy densas y duras.
Revestimiento cerrado: 100% cobertura de grano abrasivo
Junta: La unión de cinta bidireccional permite que la correa corra en CUALQUIER dirección (ignore las flechas)
Ayuda para el pulido: Recubrimiento de estearato anticarga y reductor de calor para un pulido más frío
Unión: resina sobre resinaCustomer Reviews
Overall rating: 5.0 / 5 from 28 reviews.
Had some big cleavers to make which required a lot of stock removal on some 3V. Very happy with the removal rate, heat level, and lifespan of the zirconia 40 grits for this. Have also used the 80's and 120's a bit but haven't wore any of those out yet. I'll be ordering some more in the 36 grit.
Amazing product
Best product on tge market
Sanding belts are made of good quality materials, much thicker and heavier duty than any of the other belts that have been purchased in the past. Will definitely buy again.
these sandpaper are perfect for everything whether wood, steel, aluminum, g10 or micarta ..... they do the job to perfection
We’re smoothing the edges of non ferrous belt buckles and these 150grit belts crush it. Longer lasting than our old belts. We’re converted to Red Label Abrasives!
absolutely satisfied
I love the ceramic belts, nothing short of amazing and great price. Best customer service I’ve had.
This belt type is really great for heavy grinding even for metal. I use it on harded high carbon steel, and it works really well.
Quality and price 👍👍👍
36 grit is amazing for stock removal
Belts are long lasting, hold an edge.
Just added the 4 by 36 sander to my shop. It was used and came with a pack of Red Label belts which worked great!
Fast shipping!
Knife making as a hobby.
Best belts and company I have ever worked with. Shipments are very prompt and everyone there is willing to share their experience and knowledge. Terry
Super fast super strong. However, I thought I was ordering 60 grit and somehow the default 24 grit came back up and that’s what they sent me. To send it back and order new would cost almost as much as the Belts themselves in shipping cost. 24 grit in woodworking is not too useful, but it sure does rip through the wood.
I bought the 40 grit green belt three pack for excess wood removal on knife handles . It works great , but a little too aggressive , I would buy again when needed ,but with a finer grit . This stuff is wicked on wood and FINGERS! One thing that I found is my 4”x36” belt sander would not start on its own with a new belt because the backing was so stiff , had to push start it . This went away after a few push starts and the belt loosened up . I will definitely buy again. Great product !
I'm a diy guy, retired and able to spend time in my wood shop...well, mostly wood. I do a bit of everything I can afford. I live on an island and the humidity is murder on the glue of some belt joints. One of my bigest peeves is sanding belts that don't last. It takes them a long time to get here (no fault of the seller), and I expect them to last. While I have not used these belts yet, I'm confident that they will outlast the junk I get from box stores.
Nice heavy sanding belts!
Was able to get several knives done with one belt.
Was able to get several knives done with one belt.
Was able to get several knives done with one belt.
Was able to get several knives done with one belt.
I thought that I had bought a lack-luster belt sander for knife making and bladesmithing. I soon found out that it wasn’t the belt sander, but the belts that weren’t performing how I wanted them to. The belts I bought through red label abrasives are seriously top notch at a great price. This is the place where I get belts now!
Fast shipping, great customer service and consistent belts. What more could a maker ask for?
very happy with how these belts cut and wear
RELATED PRODUCTS
The Belts For More Aggressive Material Removal
Zirconia sanding belts are built for faster material removal, longer belt life, and superior performance sanding hard materials. Compared to aluminum oxide belts, zirconia belts remove material up to 40% faster and can last two to three times longer. Their self-sharpening abrasive grain and excellent heat resistance help maintain consistent cutting performance while reducing belt changes, downtime, and overall sanding costs.
Zirconia Belts Can Be Used On A Variety Of Materials
Proudly Hand-Built In America
Manufactured in Belding, MI
Built with Industrial-Grade Materials
Shipped Factory-Direct
Every Belt is Built By Hand
Not Sure What You Need?
We can help you find the right abrasive for your tools and use cases. Contact us to speak with one of our experienced abrasive technicians.
Speak With A Technician