Tu carrito está vacío
Super happy with the finish I get from these so it's time to grab more!
Nuestras bandas de calidad industrial de primera calidad son duraderas y producen un excelente acabado para superficies irregulares de acero, acero inoxidable y aluminio.
Detalles del producto Cinturón acondicionador de superficies no tejido de 2” x 42”
- Disponible en 3 paquetes.
- El paquete de granos variados contiene 1 cinturón de grano grueso, medio y fino.
- El grano de óxido de aluminio unido con resina y distribuido uniformemente en fibras de malla de nailon de red abierta ofrece resultados consistentes
- El material flexible y de baja elasticidad con respaldo reforzado resiste la carga y la acumulación de calor para una máxima vida útil de la banda.
Equivalentes de grano de nuestras bandas de acondicionamiento de superficies
Las correas no tejidas no se clasifican según su arena, porque técnicamente no hay arena en la correa. Sin embargo, puede esperar que ciertas bandas de acondicionamiento de superficies funcionen de manera similar a ciertos tamaños de grano. A continuación se muestran los equivalentes de grano de nuestras bandas de acondicionamiento de superficies.
- Grueso (Marrón) equivale a P120-P150
- Medio (Granate) equivale a P150-P180
- Fino (Azul) equivale a P240-P280
¿Qué son los cinturones acondicionadores de superficies y para qué se utilizan?
Las correas no tejidas y las correas acondicionadoras de superficies son términos que se usan indistintamente y se refieren al mismo tipo de correa. Las correas acondicionadoras de superficies o no tejidas se utilizan para desbarbar, limpiar, mezclar y terminar contornos y bordes en superficies irregulares de aluminio, acero inoxidable o acero.
Las correas acondicionadoras de superficies se utilizan comúnmente en la fabricación de cuchillos para lograr un acabado satinado uniforme en las hojas. Terminará ahorrando mucho tiempo al intentar lijar a mano un acabado de espejo.
Si está utilizando cinturones de acondicionamiento de superficies por primera vez, deberá tener en cuenta algunas cosas. Primero, querrás utilizar una presión de ligera a media con estos cinturones. Especialmente las correas gruesas requieren una ligera presión. Si aplica demasiada presión, eliminará demasiado material y demasiado rápido. También querrás seguir una secuencia de grano adecuada, desde grueso a medio, fino y súper fino.
¿Por qué comprar correas acondicionadoras de superficies de 2 x 42 pulgadas de Red Label?
Red Label Abrasives es un fabricante de abrasivos de propiedad familiar estadounidense. Todos nuestros cinturones se fabrican en los EE. UU. en Belding, MI. Cuando compras cinturones Red Label, apoyas a las familias estadounidenses. Red Label también se enorgullece de producir correas de calidad industrial a precios asequibles. Obtendrá algunos de los cinturones de la mejor calidad a algunos de los mejores precios en línea. Como fabricante familiar, también trabajamos duro para ofrecer el mejor servicio y soporte al cliente. Si tiene preguntas sobre nuestros productos, no está seguro de qué cinturones serían mejores para su caso de uso o desea ayuda para solucionar un problema con el cinturón, nuestro equipo de soporte está a su disposición durante el horario de oficina para responder todas sus preguntas. .
PRODUCTOS RELACIONADOS
Customer Reviews
Overall rating: 4.8 / 5 from 18 reviews.
Still using these SC belts to good effect. They are a staple in my shop.
Very happy with the products and customer service. Grinding freehand can be more difficult to get consistent finish, but the surface conditioning belts are a great way to even things up at the end, as I used on the knife pictured. Happy customer here!
These surface conditioning belts are great. They quickly smooth out the belt ground finish, and they last a long time. Approved!
Knife Sharpener. I use these in the 1x30 and 2x42 to remove rust from blades and to blend after thinning blades. They work great.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
Thanks to other knife makers for turning me on to y'all. Also getting a govx discount is awesome!
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
I just make things.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
High quality
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
Not a knife maker, but I sure do admire the beautiful work on display here. I’m a retired MRO manager in manufacturing ... with a soft spot for manual machine tools that follow me home to live in the basement. I purchased three 3-packs of 2 x 42 Inch Surface Conditioning Belts to extend the utility of a little JET 2 x 42 Belt / 8 inch Disc Combination Sander. It’s a 3-wheel machine “rated” at 3/4 HP. The Surface Conditioning Belts are thick and fairly stiff. The little Jet has enough oomph to run them, but anything smaller will most likely struggle. As it is, I had to do some remedial parting line cleanup around the lower mouth of the cast iron frame to gain enough clearance for the thicker belt. I noticed one of the nine belts had a joint that looked a bit sketchy. I set a photo to Red Label Support, they concurred and sent not just a replacement, but an entire new 3-Pack. 5-Star Customer Service Beyond All Expectations !!
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
I'm new to blacksmithing and I've added a 2 x 42 to my shop for finishing and maybe even a future in blade smithing. I'm fully outfitted and ready to rock thanks to Red Label Abrasives!
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
I have a 2" x 42" belt sander for knife sharpening , it has 2 wheels , it has a pretty strong tensioning spring ( not ridiculously strong ) and it does not have enough tension to take up the slack , the motor wheel just spins , there's slack from platen , and when I finally got the belt spinning it didn't do any better than if I'd used sandpaper. By the time I had a need to use them the time had expired to return them ( I didn't need them right away but when I did it was too late ) so I threw them away. With that said I imagine if you have a sander with 4 wheels like the Grizzly co makes ( no I'm not trying to give them free advertising ) it might work well , the belts are stiff so my 2 1/2" wheels weren't big enough for the belts to flex and conform to my machine. I used sanding belts and got the results I need.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
I do metalsmithing and hand engraving and these surface conditioning belts are a great starter for surface prep
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
Top shelf quality and exemplary customer service. Customer for life here.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
Bought for son
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
These save time on hand sanding .
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
these are a must have to finish or clean up knives. I like the fine and medium the most but the course does come in handy at times on metal that really needs to be cleaned.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
I'm trying a different finish on the blade and liners. The medium grit gives it the finish I was looking for.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack
As a passionate knifemaker I wanted to try your Red Label conditioning belts after seeing them often mentioned on U-tube videos. My goal was to reduce the amount of time hand sanding my steel blades. The conditioning belts were the answer to this and I am very pleased with this purchase. I will continue to use Red Label products in the future.
2 X 42 Inch Non Woven Surface Conditioning Sanding Belts, 3 Pack