Correas de lijado no ferrosas y para madera de óxido de aluminio de 6 x 89 pulgadas, paquete de 2

Excellent product Tony, and thanks for reminding me that the belt is ok to run both ways (ignore the the arrow on the belt itself). I use this belt on a Jet 6" x 89" oscillating belt sander almost daily but I have waited to send this review in until I had put some miles on it. Of course this is not my first belt I've gotten from you guys, this is probably the 5th one. I get the 150 grit and it works great, it can hog down when needed and used lightly it can put a nice smooth finish especially on end grain. At first, I thought the belt was defective as it was loose and floppy on the top and tight and smooth in the middle (the bottom has a little slackness as well). First thing I did was flip the belt over and it was the same that way also, so I knew it wasn't the belt. The manual for my sander says most of the settings are not adjustable (except for tracking) but way in the back was a page that talked about the motor plate that was "factory adjusted" but could be adjusted if the tracking was way off. I could adjust the tracking, no problem, from the top adjuster but I thought I would measure the motor/drive pulley's relation to the rest of the machine. Wow! It was way off. I made some shims and adjusted the bolts and now it's about 90% corrected. What a difference! I was in the middle of a project and had to get back to it, but soon I'm going to get serious and make it perfect. Just wanted to share that with you so you could get a feel what your belts are doing out in the world! Thanks again for a great product. BTW, when are you going to come out with 5" 8 hole hook and loop sanding disks? Here's my website, check out what I do here. Your belts are mission critical to our quality work, couldn't do it without you. https://www.longcraftsmandesigns.com/ All my best, Shields

Shields L. 5/5 Verified February 17, 2021

Shared this photo on Instagram, #bigsawproductions Run your sandpaper on a oscillating edge sander. Good job.

Jason M. 5/5 Verified August 24, 2020

Your company got recommended to me by a friend. I was looking for some 6”x89” belts for my edge sander. I ordered some from you to try. The initial conformation said it would take 4-5 day to manufacture. I ordered them on a Tuesday night and they were shipped the next day and I had them Friday. So you must of had some in stock. The belts fit perfect. I will be ordering more. Thanks for making a great product and for being a Michigan based company

Michael B. 5/5 Verified August 19, 2026

I have been using Red Label Abrasives sanding belts on my 6x89" sander for a couple of years now. They outlast the OEM name brand belts that are more expensive. The use oof a good abrasive sanding cleaning stick periodically makes them last even longer. I would recommend this product.

Rick P. 5/5 Verified March 18, 2025

Always great service, quick delivery even at the holidays.

Mike B. 5/5 Verified December 27, 2024

These belt provide great help in my wood work. I do a lot of CNC work, and they provide a useful way of either finish up/ getting my stock ready, or just all around project work. My son is a Luthier, and uses the belt sander for a lot of his work in our shop.

Gerald (gary) S. 5/5 Verified December 22, 2023

Belts are lasting and doing the job.

Vyron C B. 5/5 Verified July 28, 2023

Had purchased a used Powermatic Edge sander. Came with several belts but they were old and broke quite rapidly (ugh). Ordered this and this belt has been a workhorse. It has taken my building of cutting boards to a new level. The belts (have only used one) appear to be very well made.

Vyron C B. 5/5 Verified July 20, 2023

Great product and customer service

Emily J. 5/5 Verified May 22, 2023

We have used Red Label Abrasive products for years and continue to do so because of the quality of the product and competitive pricing.

Bryan J. 5/5 Verified September 16, 2021