2x72 Inch 3M Cubitron II Ceramic Grinding Belts
Time is money. That’s why metalworkers around the world count on fast-cutting, long-lasting 3M™ Cubitron™ II Abrasives. These premium abrasives belts are powered by 3M Precision-Shaped Grain — the result of decades of technological advances in ceramic abrasive and microreplication technologies. As the triangular shaped grain wears, it continuously fractures to form sharp points and edges that slice through metal, wear evenly and provide super-long life and consistency at any grinding pressure.
The bottom line: 3M™ Cubitron™ II Abrasives cut faster, last longer, and help lower your production costs.
Available Grits: 36, 40, 60, 80, 120
Pack Quantity:Standard packs contain 3 belts
Knife Maker Kit contains:(2) P36 grit, (2) P60 grit, and (2) P120 grit for a total of 6 belts
Starter Kit contains:(2) P36 grit, (2) P40 grit, (2) P60 grit, (2) P80 grit, and (2) P120 grit for a total of 10 belts
Backing Material: Polyester
Applications: Stock removal, sharpening, grinding welds, shaping, cutting, and blending ferrous / non-ferrous metals (steel, stainless steel, alloys, hardened steel, cobalt, aluminum, copper, titanium, nickel, etc.). Also appropriate for dense hardwoods.
Closed Coat: 100% abrasive grain coverage
Joint: Precision engineered bi-directional tape joint allows belt to run in BOTH directions (disregard arrows)
Grinding Aid: Load and heat reducing stearate for cooler grinding
Bonding:Resin over resin
Overall, the benefits of using Cubitron belts include reduced operator fatigue, higher cut rates, and a longer belt life. The secret to Cubitron’s unrivaled performance is the revolutionary triangle-shaped abrasive grains. Conventional ceramic belts are produced with grains that are blocky and irregular. These grains get the job done, but aren’t as precise or efficient in the way that they cut (often gouging or plowing through material). Cubitron’s microreplicated triangular structures cut with precision like a knife and continuously fracture to leave points and edges sharp for enhanced performance throughout the lifetime of the belt.
Tests have found Cubitron belts to last up to four times longer than conventional ceramic belts. Cubitron belts also average up to 30% faster cutting hard-to-grind metals than the next best competitive belt.
There are many reasons to choose Red Label for your 2x72 inch Cubitron ceramic grinding belts. We are a family-owned American manufacturer based in Belding, Michigan. When you buy from us, you’re buying American made products and supporting American families and communities. When you order from our family-owned business, you will also receive unrivaled customer service and support. Our abrasive technicians are always available during normal hours of operation to answer any questions you may have. We can help you find the right abrasive to meet your needs or troubleshoot an issue you’re having related to sanding/finishing. Moreover, we strive to offer premium-quality abrasives at affordable prices. All of our abrasive products are industrial grade and available at some of the most competitive prices on the market. Our customers love our belts and we have a feeling that you will too.
Belts should be stored and used with care to prevent premature breaking. Cubitron ceramic belts should be stored in a room with temperatures between 60-80ºF and humidity levels between 35-50%. Belts should be hung on a rack above the floor and away from heaters and air ducts to prevent moisture from damaging the belts.
For belt use, belts should be carefully mounted to an appropriate machine using the machine’s proper safety guards. You should also avoid exceeding the maximum operating speed of the belt.