Sanding Belts
  • Build your own 2 x 72 sanding belt bundle - Red Label Abrasives
  • RedPro ceramic belts draped open, red grain and blue backing - Red Label Abrasives
  • Sanding Discs
  • Red Label Abra-silk sanding discs

    Foam Sanding Discs

  • 13 3/4 X 78 3/4 Inch Aluminum Oxide Snowboard/Ski Tuning Sanding Belt

    CHOOSE GRIT/OPTION:


    • Free shipping on orders over $150 (lower 48; oversized items excluded)
    • Questions? Call 844-824-1956, Mon–Fri 8:30–4 ET
    • Military discount available through GovX ID

    Marhar Snowboards Finishes with Fintech

    Take the guess work out of finishing, tuning and servicing!

    Fintech partnered with Marhar Snowboards to perfect their snowboard finishing and servicing line, lowering costs and increasing finish consistency. Read on to see how our new wax belt improved their process.

     

     

    Step 1: Deburr and Flatten

    Use our fully waterproof 80G Zirconia Belt to remove imperfections and flatten.

    Step 2: Remove Finish

    Next, use our fully waterproof 120G Zirconia Belt to remove existing finish.

    Step 3: Smooth and Hone

    Follow up with a 150G Aluminum Oxide to smooth and hone. Multiple passes may be required.

    Step 4: Wax and Finish

    Finally, apply max and finish with Fintech's special non-woven wax belt to create a perfect finish.


    Before working with Fintech, we struggled finding a consistent supplier for our services abrasives. Fintech worked with us to source the right material. We have cut our new and used snowboard service and finishing time in half with Fintech's non-woven wax belt.

    Joshua Skiles, Managing Director
    Marhar Snowboards


    • Pack Quantity: 1
    • Available Grits: 150
    • Weight: X-weight
    • Backing Material: Polyester/cotton blend
    • Waterproof: No
    • Applications: 
    • Coating: Open Coat
    • Joint: Bi-directional tape joint allows the belt to run in EITHER direction (disregard arrows)
    • Grinding Aid: Load and heat-reducing stearate 
    • Bonding: Resin over resin

     

    Aluminum Oxide Vs. Zirconia Wide Belts

    Red Label manufactures both aluminum oxide and zirconia wide belts. It’s important to understand the differences between the two to know which grain would be best for your application. 

    Aluminum oxide is the workhorse of the abrasive world. It is the most commonly used abrasive grain, especially for woodworking. Our open-coat aluminum oxide wide belts work very well for sanding softwoods like pine, spruce, cedar, and fir. They can be used for hardwoods, but the cut provided by open-coat aluminum oxide isn’t as aggressive and it will take longer to sand hardwood with open-coat aluminum oxide. Aluminum oxide has a shorter lifespan than other abrasive grains on the market, but it’s also the least expensive grain.

    Zirconia provides an aggressive cut with a long grain lifespan. Zirconia wide belts are better suited to sand hardwoods like oak, maple, and walnut. The stronger grains are able to sand through harder materials quicker. Zirconia was the strongest abrasive grain available on the market before ceramic entered the scene. As such, it is more expensive than aluminum oxide, but zirconia belts also need to be replaced less frequently. Our abrasive technicians can help you determine if zirconia or aluminum oxide would be better for your application.

    Questions? Speak To An Abrasive Technician

    Have questions about our woodworking cloth wide belts? Not sure which belts would be best for your machine or application? Our knowledgeable abrasive technicians can answer your questions, help you find the right abrasive product, and assist you with placing an order. You can speak to an abrasive technician by calling 844-824-1956, or by filling out a contact form.